WEST SYSTEM ADDITIVES

420 Aluminum Powder
420 Aluminum Powder provides limited protection from ultraviolet light in areas that will not be protected with other coatings. Can be used as a base for subsequent painting. 420 will increase the hardness and abrasion resistance of the coated surface and improve its moisture resistance. Cures to a metallic gray color. Add to mixed resin/hardener at the rate of 5 to 10% by volume (approximately 6 oz. per B group).

422 Barrier Coat Additive
A proprietary blend designed to improve cured epoxy's moisture-exclusion effectiveness. 422 is used as a barrier coating additive to help prevent gelcoat blistering. 422 also increases the epoxy's abrasion resistance. Cures to a light gray color. Add to mixed resin/hardener at the rate of 15 to 20% by weight-3 tablespoons per 8 fl. oz. epoxy (approximately 32 oz. per B group).

423 Graphite Powder
423 Graphite Powder is a fine black powder that can be mixed with WEST SYSTEM epoxy to produce a low-friction exterior coating with increased scuff resistance and durability. Epoxy/graphite is commonly used as a bearing surface, and as a coating on rudders and centerboards, or on the bottoms of racing craft that are dry sailed. It does not provide antifouling qualities. The epoxy/graphite mixture can also be used in teak deck construction to simulate the look of traditional seams and to protect the epoxy from sunlight. Cures to a black color. Add to mixed resin/hardener at the rate of up to 10% by volume (approximately 5.7 oz. per B group).